The Ford Barn - View Single Post

Chad Marchees · 10-26-2019, 06:23 PM

Problem solved. Don and Joe at Snyder's took the time to look at my pics and talk to me about it. They sent me two new tie rod ends. My original shipment of ends were made / machined wrong in a couple areas that was really evident once I had them to compare in hand.

I assembled them tonight, gave a quick light hit with a dead blow hammer and they snapped right into place. So happy I was able to get this worked out, and kudo's to Snyder's for helping me even though over a year passed since I bought them originally.

Thank You for all that helped and responded, special thanks to Larry who also went out of his way to call me personally. I was starting to think I was going nuts trying to get these other ones to work. Life is good again.

10-26-2019, 06:23 PM	#33
Chad Marchees Member Join Date: Nov 2014 Posts: 35	Re: Help! Tie rod end install Problem solved. Don and Joe at Snyder's took the time to look at my pics and talk to me about it. They sent me two new tie rod ends. My original shipment of ends were made / machined wrong in a couple areas that was really evident once I had them to compare in hand. I assembled them tonight, gave a quick light hit with a dead blow hammer and they snapped right into place. So happy I was able to get this worked out, and kudo's to Snyder's for helping me even though over a year passed since I bought them originally. Thank You for all that helped and responded, special thanks to Larry who also went out of his way to call me personally. I was starting to think I was going nuts trying to get these other ones to work. Life is good again. Last edited by Chad Marchees; 10-29-2019 at 05:27 AM.