[51woodie]

Thank you for your responses and tips on doing the job. I did get the light assembly off and found a real jackpot. Someone was in there before and did a hack job, as they taped over the wires with masking tape then vinyl tape to insulate them. I also found that insulation was missing up inside the roof area. I'll fix that by cutting off the terminal, sliding a length of woven wire loom over the wire then install a new terminal. The switch unfortunately had self destructed. The fiber piece that holds the two contacts is broken, and the little ball that goes on top of the spring in the switch toggle is missing. I will have to look for a replacement socket/switch assembly, which I hope I can find.