The Ford Barn - View Single Post - camshaft

Pete · 05-08-2013, 09:45 PM

Stan Vermeil is in Santa Rosa,Ca. You can get his contact info from the phone company.
Using one of Stan's front covers will cure the problem.

The rest of you guys need to learn to ABSORB and decipher the information you read.

1- He said the cam nut was tight.

2- He said pushing on the end of the cam made the noise go away. That won't cure piston slap.

05-08-2013, 09:45 PM	#9
Pete Senior Member Join Date: May 2010 Location: Wa. Posts: 5,407	Re: camshaft - block noise spring and plunger? Stan Vermeil is in Santa Rosa,Ca. You can get his contact info from the phone company. Using one of Stan's front covers will cure the problem. The rest of you guys need to learn to ABSORB and decipher the information you read. 1- He said the cam nut was tight. 2- He said pushing on the end of the cam made the noise go away. That won't cure piston slap.