View Single Post
Old 09-13-2019, 05:40 PM   #22
Ranchero50
Senior Member
 
Join Date: Aug 2019
Location: Hagerstown MD
Posts: 224
Default Re: Newbie '29 Speedster project, the good the bad and even the ugly (maybe)

Thanks, the wheel I'll probably replace down the road since it's literally the one thing I'm going to be looking at all the time while driving it.

I got all of the axle parts and the washers look grade 5. I'll see how it turns out once I start torquing them. The threads are slightly boogered thanks to someone beating on them trying to get the hubs off.

In other news I picked up a couple 28" x 48" drops of .063 aluminum and a 16' stick of 2"x1"x.125" aluminum angle for the base perimeter. Now to dig out the shrinker / stretcher and start fitting it.
Ranchero50 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)