The Ford Barn - View Single Post

bmodeltman · 07-23-2019, 06:47 PM

This is just the chassis body is off. What I did today was put the brake pedal on also and found with collar on, the clutch pedal was an a little more an inch lower than the brake. The pedals are supposed to be even correct? I took the pin out of the collar and pulled the clutch pedal back to even them up this was done with the linkage off and found the hole in the collar on top is about half a hoIe off towards the rear from the shaft hole. I hooked up the linkage and took all free play out. Now the clutch releases at around 1/4 from engine mount. It engages as soon as I let up on the pedal. With this adjustment the throw out bearing moves around 3/4 inch.

07-23-2019, 06:47 PM	#14
bmodeltman Member Join Date: Nov 2010 Posts: 33	Re: Clutch pedal This is just the chassis body is off. What I did today was put the brake pedal on also and found with collar on, the clutch pedal was an a little more an inch lower than the brake. The pedals are supposed to be even correct? I took the pin out of the collar and pulled the clutch pedal back to even them up this was done with the linkage off and found the hole in the collar on top is about half a hoIe off towards the rear from the shaft hole. I hooked up the linkage and took all free play out. Now the clutch releases at around 1/4 from engine mount. It engages as soon as I let up on the pedal. With this adjustment the throw out bearing moves around 3/4 inch.