Quote:
Originally Posted by Tim Ayers
You may want to contact Crower. They make some really good flathead blower flat tappet and roller cams.
|
I called Crower today and spoke with Jerry - been there since 1968 - they custom grind Flathead cams / blower cams on new cores or your old for a regrind - for a street performance but less parking lot babble - suggested a 112 lob seperation, 224 int.exh duration @ .50 and a lift of 330. Can grind whatever you want but suggested above for strong street performance assuming 7 psi boost. He can be reached at 619.661.6477