The Ford Barn - View Single Post

KR500 · 08-05-2020, 12:10 PM

I have had good luck using a 9/16 quality hole saw for removing the bulk of the swaged portion of metal on the brake drum. Studs push out easily after with no enlarging of stud hole in the hub.

08-05-2020, 12:10 PM	#3
KR500 Senior Member Join Date: Mar 2012 Location: Addison,ll. Posts: 454	Re: Brake drum removal I have had good luck using a 9/16 quality hole saw for removing the bulk of the swaged portion of metal on the brake drum. Studs push out easily after with no enlarging of stud hole in the hub.