Quote:
Originally Posted by Synchro909
What globes are you using? Over here, globes are described not by some seemingly arbitrary number but by their voltage and wattage. Eg, 12v 45w. To know how many amps that globe draws, simply divide the wattage by the volts. (3.75) For the fuse, go a little more and you should be good. So you are not going to be left blind at the worst possible moment by a blown fuse (they will ALWAYS blow at the worst moment), maybe you should consider fusing each side separately.
|
Hi Syncro, Model A globes are rated in CP (Candle Power) which is a measure of Illumination. Example 50 CP. It is an older method of categorizing globe performance/brightness. There is no way to use CP in the use of Ohms law parameters.