Re: Oil In My Water
Perhaps posting on HAMB/another Forum or talking to motor rebuilders (Bert's?) are additional resources.
Am an armchair mechanic on motors. But to me this is not making a lot of sense. Last thing you did was an oil change, without dropping the oil pan. Unless there is a crack in the block that was sealed by gunk and the oil change flushed gunk out of the crack. Seems not likely to me, if the oil was pressurized, more of a possibility, but oil is high flow, pretty much no pressure in an A. Would think you would see teh other side too - water in the oil.
Perhaps others have a better idea of where the oil system is close to the cooling system.
I am out ideas with my limited knowledge, so am bowing out - good luck, hope you find the issue.
|