The Ford Barn - View Single Post

Ol' Ron · 07-17-2017, 12:51 PM

WE have three Stromburgs on a Edelcrock intake. The Alt is from a Toyota and fit's in front of the first carb with a 1/4 inch to spare. I had to make a special bracket to mount it. I also made 1" spacers for under the carbs, this helped with the linkage as well as supplying a place to tap off for vacuum. Front carb went to the PVC center to the dist and rear to Power brakes, which we didn't use. Carbs are by Uncle Max. Yes, I'm trying to find some pics.

07-17-2017, 12:51 PM	#5
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,860	Re: Triple Carbs + alternator WE have three Stromburgs on a Edelcrock intake. The Alt is from a Toyota and fit's in front of the first carb with a 1/4 inch to spare. I had to make a special bracket to mount it. I also made 1" spacers for under the carbs, this helped with the linkage as well as supplying a place to tap off for vacuum. Front carb went to the PVC center to the dist and rear to Power brakes, which we didn't use. Carbs are by Uncle Max. Yes, I'm trying to find some pics.