The Ford Barn - View Single Post

jw hash · 10-26-2021, 10:58 PM

no spacer the wiper motor is pulled up tight to the interior header panel. I have found that under the outside header cover there was a felt seal. I use a small rubber washer and a stainless washer and a chrome nut to seal the shaft where it comes out of the header cover.

10-26-2021, 10:58 PM	#2
jw hash Senior Member Join Date: May 2010 Location: Auburn Washington Posts: 2,552	Re: Slant Window wiper Installation no spacer the wiper motor is pulled up tight to the interior header panel. I have found that under the outside header cover there was a felt seal. I use a small rubber washer and a stainless washer and a chrome nut to seal the shaft where it comes out of the header cover.