Quote:
Originally Posted by 1931 flamingo
Why not "ditch" the regulator on it now and install an original type cut-out??
Paul in CT
|
That is strongly being considered. As anyone following this can see by the last 3 or so responses there is some conflicting opinions as to what I should be seeing at the battery.
I did speak with birdhaven who now owns Fun Projects and they felt that 6.1V was fine. Information here as well as other sources ( battery MFR's) say 2.3V or so per cell is required for obtaining a full charge
What are the opinions on a source for a quality cutout, Stock design, diode, and I'm guessing not "fun projects" ???
Thanks