The Ford Barn - View Single Post -

DHZIEMAN · 08-23-2019, 01:57 PM

Just the negative or both? I venture the negative! Another method is take the bolt out of the clamp that is causing the problem getting tight and file it from the inside part that is stopping the clamp from tightening. Someone may have replaced the negative cable with a cable with a positive post end. (Or, just use what ya got in the picture on the suspect terminal.) The key is get um, clean and tight!

08-23-2019, 01:57 PM	#2
DHZIEMAN Senior Member Join Date: Dec 2016 Location: Sunrise Beach, Mo Posts: 439	Re: - battery post Just the negative or both? I venture the negative! Another method is take the bolt out of the clamp that is causing the problem getting tight and file it from the inside part that is stopping the clamp from tightening. Someone may have replaced the negative cable with a cable with a positive post end. (Or, just use what ya got in the picture on the suspect terminal.) The key is get um, clean and tight!