[BRENT in 10-uh-C]

Hey Richard, the short answer is it is possible to do with some alterations.

Since getting into the upholstery biz, what I have discovered was that LeBaron Bonney's kits were very inaccurate when compared to original panels or prints. The 55A & 55B cowl kick panel cardboard was different originally, so this would be one area. The A-56512 Door Panel cardboards are different between the 55B and the 55A, but again you may be able to modify. The A-55664 Header Cardboard is different between the two. I could go on with the upper trim back panels, roof rail trim, et/al, but my point is the differences between original panels were slight, and after seeing how incorrect L/B panels were made, it is indeed likely that you can make it work. The same applies for seats. Good luck and best wishes.