The Ford Barn - View Single Post - Rear hub wheel bearings again, what stops lateral movement?

Tom Wesenberg · 04-16-2016, 08:40 PM

Sponsored Links (Register now to hide all advertisements)

The cage must rotate along with the rollers. Original rollers are made by rolling steel into a spiral form. A little side movement is fine, but nothing should be able to grind on the metal.

04-16-2016, 08:40 PM	#2
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Rear hub wheel bearings again, what stops lateral movement? Sponsored Links (Register now to hide all advertisements) The cage must rotate along with the rollers. Original rollers are made by rolling steel into a spiral form. A little side movement is fine, but nothing should be able to grind on the metal.