Quote:
Originally Posted by eicke
Decling helped me out on this modification. Thought I'd add a twist as I appreciated his knowledge and Coop's.
Running an electric fuel pump on my Flathead Model A.
I'm a cheap SOB and couldn't see spending $150 on a shorty Speedway pump stand.
The diameter of the Henry stand at the X (first pic) is close (within a thou or two) to the bore of the 1" thick carb plate. The casting in this area is off a couple thou. Second pic is where I hacked off the Henry stand. Chucked it up in the South Bend to clean the cut up. Third pic is the new shorty stand pressed into the plate. Added a little anerobic sealant for good measure.
Now to add the PCV adapter.
-Ron
|
Man, I love 'thinking out of the box', especially when the workmanship is at least as good as the thinking. That's SLICK! And thank you for the kudos!!
Coop