Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by 34PKUP
You are using 1/4" steel lines to mount the filter to the "firewall"?
Is that normal for "firewall" mounting ?
|
No, I used the 1/4 inch lines to route the oil lines the same as the stock set up using the stock oil filter mounted on the stock 8BA block. I recall now that I did use 1/4 inch brake line, not fuel line. I am assuming the original post was referring to mounting the stock filter on the firewall and then running the lines the same way the OEM lines were routed. If he was referring to using a remote 95% filter set up, I don't know if the 1/4 inch lines would work as well as the larger ID hose.