Re: 1956 Fairlane Victoria flex plate 292 fordomatic question
Quote:
Originally Posted by bfdinardo
1 of the spacers will go between the crank and flex plate and the other 2 spacers will go between the flex plate and flywheel/ring gear. thanks for the direction.
|
THANK YOU for getting back and letting the board know.
__________________
*****
- DISCLAIMER -
The above posted information is in my opinion only (IMO) and may contain copy and paste material(s).
In addition, any above tech information is supplied in good faith. No responsibility implied or otherwise can be accepted for the way others use or interpret provided data.
Your experience(s), opinion(s) and mileage may vary.
DIAGNOSED CDO - (OCD In Correct Alphabetical Order)
|