View Single Post
Old 03-27-2019, 10:17 AM   #9
bfdinardo
Member
 
Join Date: Apr 2017
Location: Cincinnati, OH
Posts: 64
Default Re: 1956 Fairlane Victoria flex plate 292 fordomatic question

All,
great feedback! So I finally got a few minutes with a pair of calipers. To best match the thickness of the original plate which will ensure the 6 bolts to crank shaft don't stick out too far and to best match the original flange location to bolt the flex circuit to flywheel/ring gear, 1 of the spacers will go between the crank and flex plate and the other 2 spacers will go between the flex plate and flywheel/ring gear. thanks for the direction.
bfdinardo is offline   Reply With Quote