The Ford Barn - View Single Post

JtownJoe · 12-07-2012, 07:44 PM

Is it possible to remove accelerator linkage assembly while engine is in the vehicle (30 Tudor). I have the head off & can't seem to find a way to remove assembly, no matter which way I try to take it out it hangs up on the firewall or the block/flywheel housing. Mine has developed slippage in it & I've lost some of the full travel on the carb side as compared to the pedal side.

12-07-2012, 07:44 PM	#1
JtownJoe Senior Member Join Date: May 2010 Location: Johnstown, PA Posts: 342	accelerator linkage Is it possible to remove accelerator linkage assembly while engine is in the vehicle (30 Tudor). I have the head off & can't seem to find a way to remove assembly, no matter which way I try to take it out it hangs up on the firewall or the block/flywheel housing. Mine has developed slippage in it & I've lost some of the full travel on the carb side as compared to the pedal side.