View Single Post
Old 12-31-2017, 06:57 PM   #6
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 10,158
Default Re: thread renovation ?

If they are US nation pipe thread, you could get NPT taps for most sizes. If they are bolt thread national fine or course, the thread chasers will work or an old bolt with some flutes cut into it. Steel wire brushes like the ones used to clean battery terminals may also work. It just depends on what size they are.
rotorwrench is offline   Reply With Quote