The Ford Barn - View Single Post

Ziggster · 02-13-2021, 07:00 PM

Mine (C59A) originally was rebuilt with a 40 thou bore, and it needed a 20 thou over to clean things up. So, 60 thou over with stk 3.75” crank and stk heads Went with Eggy domed pistons, but there is another thread here about using these pistons with aluminum heads as there could interference.

02-13-2021, 07:00 PM	#2
Ziggster Senior Member Join Date: Aug 2018 Location: Ottawa, ON Posts: 850	Re: 8ba engine Mine (C59A) originally was rebuilt with a 40 thou bore, and it needed a 20 thou over to clean things up. So, 60 thou over with stk 3.75” crank and stk heads Went with Eggy domed pistons, but there is another thread here about using these pistons with aluminum heads as there could interference.