View Single Post
Old 06-24-2010, 08:09 AM   #6
Don/WI
Senior Member
 
Join Date: May 2010
Location: Kaukauna, Wisconsin
Posts: 377
Default Re: Rotor gap to distributor body terminals

I have discovered that the gap between the rotor and the four terminals in the distributor body can vary by more than .015" ~ .025". I bend the rotor tab so it has a .025" gap at the terminal that had the greatest gap and then I filed the remaining terminals until they all had a gap of .025". It takes a little time to do this but I feel it is worth it to have my "A" running as good as possible. Don/WI
Don/WI is offline   Reply With Quote