The Ford Barn - View Single Post

WHN · 10-29-2018, 04:03 PM

I think if you use a good quality sealer, and follow the directions to the “T”, it will work for you.

Remove tank, coat at least twice, and let tank stand for a couple of days before the second or third coating.

Take your time!!!! Read instructions!!!! Don’t take short cuts!!!!

We have had really good luck doing this. I even think that a good sealer will seal over one that was not done properly. If they seal over rust, why not other potential problems.

What do you have to loose.

10-29-2018, 04:03 PM	#21
WHN Senior Member Join Date: Mar 2017 Location: Connecticut Shoreline Posts: 1,817	Re: Gas tank seeping. I think if you use a good quality sealer, and follow the directions to the “T”, it will work for you. Remove tank, coat at least twice, and let tank stand for a couple of days before the second or third coating. Take your time!!!! Read instructions!!!! Don’t take short cuts!!!! We have had really good luck doing this. I even think that a good sealer will seal over one that was not done properly. If they seal over rust, why not other potential problems. What do you have to loose. Last edited by WHN; 10-29-2018 at 04:14 PM.