View Single Post
Old 02-16-2018, 12:00 PM   #23
The Master Cylinder
Senior Member
The Master Cylinder's Avatar
Join Date: Aug 2012
Location: SoCal
Posts: 142
Default Re: unusually headlight issue

Originally Posted by Gary Karr View Post
Y-Blockhead and Tom are both correct.
Yes, Low beam filament should be on top. I read on Ford Barn a while back that if you put the brighter filament on the top, using the 50cp filament for low beam, and then tie the high and low filaments together the result is a 82cp for high beam (50cp +32cp=82).

That is what Ron Francis recommends for his Super Bright Bulbs resulting in 75cp low beams and 125cp high beams (75cp +50cp +125cp).
The Master Cylinder

Enjoying life at the beach in SoCal...
The Master Cylinder is offline   Reply With Quote