View Single Post
Old 02-12-2018, 06:18 AM   #5
James Rogers
Senior Member
 
James Rogers's Avatar
 
Join Date: May 2010
Location: Asheville,NC
Posts: 3,084
Default Re: Front Motor Mount

There should be some space between the spring plate and the mount. The plate is only spring in case the motor bounces down against it. If you mount it with the mount solid against the plate, you defeat the purpose of the 2 springs on top and the single spring on the bottom. If you are intent on it touching, you can tighten the bottom nut enough to have it touch.
James Rogers is offline   Reply With Quote