View Single Post
Old 02-11-2018, 03:50 PM   #8
wrndln
Senior Member
 
Join Date: May 2010
Location: Lakeville, MN
Posts: 4,384
Default Re: Accelerator Foot Rest Location

JBill is correct, the hole is so the threaded part of the footrest can be lowered into the hole if desired. If you check the picture I attached above, you can see the flat part of the footrest plate faces the drivers side of the vehicle, with the threaded shaft aligned with the hole in the floorboard.
Rusty Nelson
wrndln is offline   Reply With Quote