NEED HELP WITH PROBLEM!!!!!!!!!!!!!
Don P. and I worked on the 34 all day, he came up and I had everything ready to go. Had engine top end all back together, carburetor and fuel pump back and installed, rebuilt by Ken of CT., water pumps and coil installed, rebuilt by "Skip", distributor installed, redone by Don P. and myself. New Oil, new hoses and water, battery hooked up and checked for voltage on coil. Spark plugs cleaned and checked with air pressure. New spark plug wires. Now I have gas in carb, spark at Plugs and IT WILL NOT FIRE, NOTHING. I MEAN Not even backfire, I took the distributor off a running engine I have, changed distributor ( checked the condenser, good ) and changed out wire looms, STILL NOTHING! I changed the carburetor, STILL NOTHING! We checked the spark plug voltage while cranking 5KV, If you run on machine while at 1000 Rpm it is about 15KV. I have fuel, I have electrical power, I have air, I should have a FIRE!!!
.
