Quote:
Originally Posted by dmsfrr
You still need a wiring diagram
Brights don't work. The connector on the floor switch may be loose or corroded, along with connections in the junction block on the left front inner fender, or those filaments in the bulbs may be burned out (not as likely but still possible).
Also... clean the Ground wire connection for both headlights. It may be fastened to a mounting screw for each junction block.
.
|
I replaced the headlight floor dimmer switch with this one from Napa
https://www.napaonline.com/en/p/ECHDS101
it worked to turn the lights on and the brights the first few times.. but now the brights don't come on anymore. the headlights are 6volt