The Ford Barn - View Single Post

deuce lover · 03-07-2020, 11:21 AM

No easy way.You have to pull the trans.2 ways to do it.Pull the engine or drop the rear end and pull it back. Pulling the rear is the least PITA,IMO.Either way its a PITA.Make sure the clutch and PP is good before reassembly.

03-07-2020, 11:21 AM	#2
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,308	Re: Throw out bearing No easy way.You have to pull the trans.2 ways to do it.Pull the engine or drop the rear end and pull it back. Pulling the rear is the least PITA,IMO.Either way its a PITA.Make sure the clutch and PP is good before reassembly. Last edited by deuce lover; 03-07-2020 at 11:27 AM.