The Ford Barn - View Single Post

steve fritz · 05-15-2019, 08:36 PM

I am looking to replace the floor material on the back end floor panels of my 55 Ford project. The original flooring material is some kind of mason board , only about 1/8 inch thick. It is glued to the metal structural panel. It has long ribs about 3/4 inch wide running the from front to back direction. Material has a reddish color finish . I would attach a picture of the old stuff , but have not had any luck with attachments to these messages.
Anybody have an idea where to get this panel material or a good substitute?
Thanks!
Steve

05-15-2019, 08:36 PM	#1
steve fritz Senior Member Join Date: May 2010 Location: onalaska , wisconsin Posts: 535	material for 55/56 Ford station wagon I am looking to replace the floor material on the back end floor panels of my 55 Ford project. The original flooring material is some kind of mason board , only about 1/8 inch thick. It is glued to the metal structural panel. It has long ribs about 3/4 inch wide running the from front to back direction. Material has a reddish color finish . I would attach a picture of the old stuff , but have not had any luck with attachments to these messages. Anybody have an idea where to get this panel material or a good substitute? Thanks! Steve