The Ford Barn - View Single Post

Burt Lake Barn · 06-03-2018, 06:31 PM

If it is the gear I am thinking, it is a 29 tooth so I understand that makes this a 1950 or earlier tranny gear set and therefor can be converted back to a closed drive by replacing the main shaft with an 81A-7061 shaft. Not positive on the rear end ratio but it came in the original 1941 Ford car. Sorry for the delay on my response.

06-03-2018, 06:31 PM	#7
Burt Lake Barn Member Join Date: Dec 2015 Location: Indian River, Michigan Posts: 59	Re: Trans identification (year) If it is the gear I am thinking, it is a 29 tooth so I understand that makes this a 1950 or earlier tranny gear set and therefor can be converted back to a closed drive by replacing the main shaft with an 81A-7061 shaft. Not positive on the rear end ratio but it came in the original 1941 Ford car. Sorry for the delay on my response.