The Ford Barn - View Single Post

rer_239 · 12-13-2018, 08:31 AM

started to reassemble the front spindle and the book says put the king pin thru the spindle to see if there is play. didn't seem to be any. put the king pin thru the spindle and the axle and there seemed to be a lot of play. took it back out and measured the king pin. it looked like .81. is there a bushing that goes into the axle?
thanks
Dick

12-13-2018, 08:31 AM	#1
rer_239 Senior Member Join Date: May 2010 Location: muskegon, mi Posts: 297	king pin fit started to reassemble the front spindle and the book says put the king pin thru the spindle to see if there is play. didn't seem to be any. put the king pin thru the spindle and the axle and there seemed to be a lot of play. took it back out and measured the king pin. it looked like .81. is there a bushing that goes into the axle? thanks Dick