Re: Spark Plug Gap
Quote:
Originally Posted by gary678*
I have a 12 volt system, 6.1 Snyder's head, and a Pertronix Flame Thrower 3.0 OHM Coil (40611). Conventional wisdom says with a high compression head that the gap should be .030-.032. However with the Pertronix head the gap can be moved to as much as .040. Experiences? Suggestions? Thank you for any info. Gary D.
|
No experiences with your coil. Experiment, right down what you did and how it behaved ! Have fun going for test drives ( make the drives on the same roads)
__________________
Don't force it with a little hammer tap, tap, tap
get a bigger hammer tap done
|