The Ford Barn - View Single Post

Jacksonlll · 07-04-2019, 03:28 PM

Use a jumper cable to make sure the engine is grounded. Most of us have a second ground cable between the frame and bell hsg. Sometimes that engine does not have a good ground.

07-04-2019, 03:28 PM	#12
Jacksonlll Senior Member Join Date: Jul 2012 Location: Michigan-- Member of Oakleaf of MARC Posts: 1,686	Re: Model A starter clunk then no electrical Use a jumper cable to make sure the engine is grounded. Most of us have a second ground cable between the frame and bell hsg. Sometimes that engine does not have a good ground.