The Ford Barn - View Single Post

Y-Blockhead · 07-11-2021, 01:15 PM

How about setting your timing at 0° #1 cylinder, mark the pulley adjacent to your pointer , then turn the crank clockwise until it fires at #2 and mark the pulley again adjacent to your pointer. A plug fires every 180°. 1-2-4-3.

07-11-2021, 01:15 PM	#7
Y-Blockhead Senior Member Join Date: Jul 2011 Location: Redondo Beach, CA Posts: 5,848	Re: 180° marks on crank pulley How about setting your timing at 0° #1 cylinder, mark the pulley adjacent to your pointer , then turn the crank clockwise until it fires at #2 and mark the pulley again adjacent to your pointer. A plug fires every 180°. 1-2-4-3. Last edited by Y-Blockhead; 07-11-2021 at 01:27 PM.