bell housing for flathead to T-5 transmission
This is the truck "hogshead", stamped steel bellhousing, and starter plate.
3 pieces total. All in very good shape.
If you wanting to bolt a Chevy T-5 transmission behind a 8BA flathead this is most of the stuff you need.
If you read further down, a couple folks wrote about the Dwight Bond adapter plate that you need as well.
Pretty darn sure this is the correct starter plate. The pic makes it look angled but it isn't.
SOLD IT.
Last edited by corn boy; 12-17-2012 at 01:24 PM.
Reason: added info, sold the parts.
|