The Ford Barn - View Single Post - Crank Pully Nut

denns1989 · 06-14-2020, 07:46 PM

Ahh just realized I will need a deep socket 1 3/8, the 1 1/4 I tried cleared the cogs, not the nut - duh ! My bad, thanks for confirmation, clearance to radiator is tight, so I'm going at this blind. Thanks again.

06-14-2020, 07:46 PM	#3
denns1989 Member Join Date: Nov 2014 Posts: 45	Re: Crank Pully Nut - b6319a Ahh just realized I will need a deep socket 1 3/8, the 1 1/4 I tried cleared the cogs, not the nut - duh ! My bad, thanks for confirmation, clearance to radiator is tight, so I'm going at this blind. Thanks again.