Re: Rear axle shaft nut, how to turn on
Hello Jim,
the way of the drum is enough on the axle shaft. I put the fiber gasket too between nut and washer. I try to put in a second shim on the shaft. The key is new.
Today I found an other problem. While I wantet to renew the outer grease seal (Simmering) I saw some big corrosion on the rolls of the bearing and much deep wholes in the hub. -
15 miles behind Nürnberg I was on the shool for 10 years.
__________________
Beste Gruesse aus Deutschland,
Werner
Ford Model A, Roadster, 1928
Citroen 11 CV, 1947
Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version
|