The Ford Barn - View Single Post - Re-torque head

30 Closed Cab PU · 10-29-2018, 01:25 PM

I take the dist. out. Not difficult. I mark the dist. cam to the plate as a reference for a double check when putting the dist. back on. As long as the cam screw is tight, the dist./motor timing will not change.

There may be other methods, or perhaps a special tool, I do not know.

10-29-2018, 01:25 PM	#3
30 Closed Cab PU Senior Member Join Date: Aug 2018 Posts: 2,332	Re: Re-torque head I take the dist. out. Not difficult. I mark the dist. cam to the plate as a reference for a double check when putting the dist. back on. As long as the cam screw is tight, the dist./motor timing will not change. There may be other methods, or perhaps a special tool, I do not know. Last edited by 30 Closed Cab PU; 10-29-2018 at 01:26 PM. Reason: Changed cam nut to cam screw.