View Single Post
Old 08-25-2019, 04:39 PM   #3
Senior Member
Magicbox51's Avatar
Join Date: Jun 2017
Location: Walla Walla, WA
Posts: 561
Default Re: 1930 Tudor Sedan

It's probably not the steering box. Mine did not go away until I addressed the slop in the way the ball at the end of the wishbone fits into the bottom of the flywheel housing. You should also check the Pitman arm where it connects to the steering gear output shaft. You should have zero play and tighten that bolt as tight as you can. Also check the drag link and tie rod ends.
-Bill G
Magicbox51 is offline   Reply With Quote