View Single Post
Old 08-23-2019, 01:12 AM   #7
alexiskai
Senior Member
 
alexiskai's Avatar
 
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,332
Default Re: Buyer beware on another repro part

But why go to the trouble of spec'ing a shoulder bolt for this application, as Ford apparently did, and then making the threaded portion long enough that it could be screwed in far enough to contact the brush? Tightening the cover too far should be impossible, if the overall length and shoulder length of the bolt are correct.
alexiskai is offline   Reply With Quote