View Single Post
Old 08-22-2019, 11:12 PM   #6
SteveB31
Senior Member
 
SteveB31's Avatar
 
Join Date: May 2010
Location: Englewood, Colorado
Posts: 1,185
Default Re: Buyer beware on another repro part

Not all vendors sell the wrong screw for that application. We sell the right one and have for 40 years. Also, keep in mind many horn covers have had that screw tightened too much in the past pulling the horn motor cover in a bit making even the correct screw appear too short and cause it to short out the brush. Make sure your motor cover is flat and not pulled in around that screw.

Steve @ Bertís
SteveB31 is offline   Reply With Quote