View Single Post
Old 08-18-2019, 12:33 PM   #8
kenparker
Senior Member
 
kenparker's Avatar
 
Join Date: May 2010
Location: Van, Texas
Posts: 1,029
Default Re: New clutch - should the throw out bearing disengage?

Follow Patricks advice. Free Play should be 1 to 1.5". Adjust free play at the adjustable link between the pedal end and the arm on the bell housing.




watching thru the inspection hole the Fork that operates the TO should come all way back til it touches the face of the Transmission bearing reatiner.. As you press pedal down the TO will move forward ti lit touches the fingers. The least amount of touch to the fingers will make the TO spin.


Is the spring that pulls the TO and its carrier and its carrier in place. That spring IS IMPORTANT.
kenparker is offline   Reply With Quote