The Ford Barn - View Single Post

ryanheacox · 06-22-2019, 11:24 AM

Thanks for the suggestions everyone. I’ll do the easy checks first, the fan is an aluminum 2 blade. I have read about balance problems with them before so it’s worth a check. The oil level was full 500 miles ago/in April when I checked but I will definitely check again before going further.

Theres a 20 ton shop press on sale at horrible freight right now for $150 and this project will give me the excuse to get it��

Also found out my neighbor has front and rear spring spreaders so I should be in good shape to pull everything apart.

06-22-2019, 11:24 AM	#14
ryanheacox Senior Member Join Date: Apr 2013 Location: Northwest CT Posts: 1,092	Re: Transmission Bearings? Thanks for the suggestions everyone. I’ll do the easy checks first, the fan is an aluminum 2 blade. I have read about balance problems with them before so it’s worth a check. The oil level was full 500 miles ago/in April when I checked but I will definitely check again before going further. Theres a 20 ton shop press on sale at horrible freight right now for $150 and this project will give me the excuse to get it�� Also found out my neighbor has front and rear spring spreaders so I should be in good shape to pull everything apart.