The Ford Barn - View Single Post

Jim Brierley · 02-27-2017, 12:29 PM

1.120" will work fine with the A or B cam. FYI, there were 3 different B cams produced. Most had .302" cam lift. A few had .315" cam lift and some .339". The last was the best performer, but all were an improvement over the A cam.

02-27-2017, 12:29 PM	#5
Jim Brierley Senior Member Join Date: Jun 2010 Location: Temecula, CA Posts: 4,085	Re: B Camshaft 1.120" will work fine with the A or B cam. FYI, there were 3 different B cams produced. Most had .302" cam lift. A few had .315" cam lift and some .339". The last was the best performer, but all were an improvement over the A cam.