View Single Post
Old 05-31-2011, 05:17 PM   #37
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,464
Default Re: Engine seized 2 miles after rebuild

Modifications carried out on the oil system have to be well sorted out to make sure the oil gets to all passages as required. If the plugs aren't put in the correct locations, there can be a BIG problem. All the bearings surfaces above and in front of the rear main bearing depend on it.

Kerby
rotorwrench is offline   Reply With Quote