View Single Post
Old 04-26-2019, 04:11 PM   #9
BUBBAS IGNITION
Senior Member
 
BUBBAS IGNITION's Avatar
 
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 3,689
Default Re: Helmet style distributor 85 to 60hp

Quote:
Originally Posted by Jembow View Post
If you look at the power curves on the Van Pelt site you'll see the 85 curve drop off at 3800, while the 60 is still going up at 4000. V8-60 midgets would pull up to 7500. It's a motor that wants to rev.
Thats kinda why i asked, it would take a very very very special helmet distributor to run anywhere close to 7500 rpm.

And that was the discussion regarding a helmet distributor for a 60. There is no difference in a 60 helmet from the other helmets........same point set and same cam advance etc......
__________________
If it Makes Spark, we do it !!!!
www.bubbasignition.com
jimlinder@juno.com
BUBBAS IGNITION is offline   Reply With Quote