[Newc]

The inner wire of the starter cable is crimped on the end of the knob shaft; Open the crimp [grinding]half way remove old wire and install new wire with silver solder. It will be plenty strong. Must be clean tho. If the outer spiral winding housing is bad also replace with a solder joint at the original mount area. . If solder gets in wire hole a long drill will gently remove it. Seebee in Pendelton, Or is doing a '32 BB also. Same problems. Save those 'chocholate' Knobs, repops wrong brown.
I just got my wiring from Yesterday Wiring and it is Perfect!! Now they are my sole source as recommended by others here. later Newc