View Single Post
Old 06-12-2020, 08:30 AM   #6
Pat/Ohio
Senior Member
 
Pat/Ohio's Avatar
 
Join Date: May 2010
Location: Wilmington, OH/Lakeland, FL
Posts: 952
Default Re: 32 intake to Stromberg carburetor adapter?

Sponsored Links (Register now to hide all advertisements)
I believe you are going to find that the spacing of the two (2) studs on the original '32 intake are different than the spacing on the adapters. I checked with Secrets of Speed about their adapter a year or so ago and found that the adapter they offer wouldn't fit the original intake. Bummer!

I purchased an adapter made by TransDapt that would probably work. It is made to adapt several brands of carbs to several types of single barrel manifolds. I have not installed one yet as I sold the original '32 manifold. You would need the "D" shaped Stromberg base and not the "chevron" style base carb. I would shave the TransDapt adapter to the footprint of the Stromberg base. Just a thought! Good luck.

https://www.jegs.com/i/Trans+Dapt/96...iABEgIJY_D_BwE

Another link to a similar adapter:

https://www.ebay.com/itm/Summit-Raci...ss!45177!US!-1

Stay safe!
Pat

Last edited by Pat/Ohio; 06-12-2020 at 09:49 AM.
Pat/Ohio is offline   Reply With Quote